Acrylic Sealant

Ready for use and easy to apply
Dries rapidly and has only very little odor.
Provides a flexible durable seal.
Can be applied on vertical, horizontal or overhanging surfaces without subsiding or sagging
Water-based product which allows tool clean-up with water.

Items	Unit	Results (colored)	Test Std
Appearance	/	/	Q/JL-00-T001
Density	g/cm³	1.57±0.1	GB/T 13477.2-2018
Tack free	min	45	ASTM C679
Sagging	mm	0	GB/T 13477
Solid Content	%	78	GB/T 2793
Hardness, Shore A	/	49	ASTM C661
Curing Depth (24h)	mm	1.2	GB/T 32369
Curing Depth (after 7 days)	mm	3.5	GB/T 32369
Elongation at break (after 7 days)	%	600	ASTM D412-16
Tensile Strength (after 7 days)	Mpa	0.25	ASTM D412-16

Temperature: +5 to 45°C (40 to 115°F) (ideal 20°C ± 5°C [68°F ± 9°F])
Relative humidity: Ideal between 15 and 50%, maximum 85%.
Outdoor: Surface must be at a temperature at least 3°C (5°F) higher than dew point.
Do not apply in direct sunlight. Application conditions must be maintained during product application and drying.
Apply when no rain is expected within 8 hours.
Low temperatures extend drying time.

Store below 90°F (32°C) in a dry place. First-Seal acrylic Sealant has a usable life of 12 months from date of manufacture. Refer to product packaging for use-by date.