First – seal pv 906 has passed ISO:9001 certification
PRODUCT DESCRIPTION
First-seal photo voltaic module sealant id one component RTV silicone rubber, no solvent. This product has adhesion to aluminum, glass.
SPECIAL FEATURES
Strong adhesion ability
Non corrosive to metals
Temperature range (0°C ) Cured sealant
Aging resistance
Uv resistance
Weather resistance
Water resistance
Fast curing
Flexible at low (-40°C) and high temperatures (+260°C)
APPLICATION
Solar panel frame, photo voltaic glass waterproof seal.
Bonding and sealing the junction box of solar modules.
Other multiple uses
ATTENTION
Application Temperature 5°C to 40°C
Temperature Resistance 45°C to +150°C
STORAGE
Stored in a dry, ventilated, cool place storage temperature should not exceed 27°C, Storage period of 12 months.
The best use before end date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
These figures are only intended as a guide and should not be used in preparing specification.